Sign brackets from Municipal Supply & Sign Co.

#1-RP U-Channel Cap

Flat blade name sign post bracket for all U-channel posts and flat blades.

#2-RP Round Post Cap

Flat blade name sign post bracket for 2-inch round posts and flat blades.

#457F Universal Cross

Universal cross separator for use with Rok-Pruf or Econ bracket. May be set to 45 or 180 degrees for oblique intersections (two-piece set). For use with flat blades.

#457X Universal Cross

Universal cross separator for use with Rok-Pruf or Econ bracket. May be set to 45 or 180 degrees for oblique intersections (two-piece set). For use with extruded blades.

#3-90 Cross

90-degree cross separator for use with #1 and #2 post caps and flat blades.

#17U U-Channel Cap

For all U-channel posts and extruded aluminum blades.

#17 Cap For Round Posts

POAD Round Post Adapter

This adapter allows you to utilize our 2 3/8-inch diameter round post caps on your 3-inch diameter posts.
Includes 4 standard set screws.

PAUC U-Channel/Round Post Cap Adapter

Connect channel post and 2 3/8" round post caps.
Includes nut & bolt set.

Z-238 Interlocking Bracket Set

Aluminum interlocking bracket set. Secures one traffic control sign to
2 3/8-inch round post. Set includes two brackets, plus standard mounting hardware.

#922F Cap for Round Posts

Flat blade street name sign bracket for 2 3/8-inch round posts.

#922X Cap for Round Posts

Extruded blade street name sign bracket for 2 3/8-inch round posts.

#97SQX Cap for Square Posts

Extruded blade street name sign bracket for 2-inch square posts.

#97SQF Cap for Square Posts

Flat blade street name sign bracket for 2-inch square posts.

#134X Cap for Square Posts

Extruded blade street name sigwn bracket or 1 3/4-inch square posts.

#134F Cap for Square Posts

Flat blade street name sign bracket or 1 3/4-inch square posts.

91UF-NU180 U-Channel Cap

Flat blade street name sign bracket for U-channel posts. Blade sits parallel (180 degrees) to post flange.

91UX-NU180 U-Channel Cap

Extruded blade street name sign bracket for U-channel posts. Blade sits parallel (180 degrees) to post flange.

#91UF-OL90 U-Channel Cap

Flat blade street name sign bracket for U-channel posts. Blade sits at 90-degrees to post flange.

#91UX-OL90 U-Channel Cap

Extruded blade street name sign bracket for U-channel posts. Blade sits at 90-degrees to post flange.

#9-90F Cap for Flat Blade Signs

Flat blades 90-degree cross separator street name bracket for use with any Supr-Loc post cap

#9-90X Cap for Extruded Blade Signs

Extruded blades 90-degree cross separator street name U-Channel Cbracket for use with any Supr-Loc post cap.

#5 Loc-in Cap

For 2 3/8-inch round posts. Slide in slots for extruded aluminum blades.

#4 Metro Wing Bracket

May be bolted or strapped to posts. Secures flat or extruded aluminum street name or traffic control signs.

#8 Metro Wing Bracket

May be bolted or strapped to posts. Secures flat or extruded aluminum street name or traffic control signs. Patent No. 0,233,017

#800 Metro Wing Bracket

May be bolted or strapped to posts. Secures flat or extruded aluminum street name or traffic control signs.

#812F UC Cap 90

For use with flat street name plates on a U-channel post. Blade sits 90 degrees to post flange.

#812F UC Cap 180

For use with flat street name plates on a U-channel post. Blade sits parallel (180 degrees) to post flange.

#812F 90 Cross

For use with flat street name plates in conjunction with #812 cap.

#812F Cap for 2 3/8-inch Round Post

For use with flat street name plates on a 2 3/8-inch diameter round post.

#827F 4x4 Post Cap

Flat blade street name bracket for use on a 4-inch by 4-inch wooden post.

Pyramid Dress Cap

Available for 1 3/4-inch and 2-inch square posts.

Acorn Cap

Available for 2 3/8-inch diameter round posts.

COM-77 Overhead Cable Sign Bracket

Sign bracket for overhead cables. Heavy-duty, steel-plated and aluminum overhead sign mounting bracket. Swivels to any angle and adjusts to compensate for tilt. For cables 1/4 through 3/8 inches and any size sign. All hardware is included.

COM-88 Overhead Mast Arm Sign Bracket

Sign bracket for overhead mast arm. Use stainless steel strapping to secure to any mast arm. Heavy-duty steel plated and aluminum parts. For any size signs. All hardware is included.

Chevron Bracket

Aluminum bracket secures two chevron signs to a single post. The angle of the chevron signs may be adjusted after installation of the bracket, so the position of the post is no longer critical.

CAB 1 - for 12"x18" and 18"x24" signs.
CAB 2 - for 18"x24" and 24"x30" signs.

BB7 - Complete Buckle Bracket Assembly

For large diameter poles. Adustable to fit posts 4-12 inches in diameter. Add another 5AA for an additional sign on the opposite side of the post. Each sign requires two of these assemblies.

M4SS - Threaded center hole bracket

Stainless steel, threaded center hole bracket. Secure to pole with stainless steel strapping. Threaded center hole saves installation time. For use on posts 4 inches in diameter or more.

P4SS - Threaded center hole bracket

Stainless steel, threaded center hole bracket. Secure to pole with stainless steel strapping. Threaded center hole saves installation time. For use on posts 4 inches in diameter or more.

Cantilever Bracket

Used for mounting two-sided and cantilever type signs on poles 2 inches or more in diameter. Used with nut and bolts. Secure to pole with stainless steel strapping.

CAA - Aluminum
CSS - Stainless Steel

Aluminum Wing Bracket

Straps or bolts to any size pole. standard lengths are 12, 18 and 24 inches. Other lengths are available.

WB12 - 12-inch length.
WB18 - 18-inch length.
WB24 - 24-inch length.

SNAP - Snaplock Adjustable Mounting Clamp

Radiator-like clamp for quick mounting of signs. Needs only a screwdriver to tighten. 40-inch strap length.

Stainless Steel Strapping

3/4" x .020" strapping in stock.
SS - 200-foot coil in dispensing box.

See Tools & Hardware for strapping cutters and tools.

O6SS - Wing Strapping Seal

Binds and holds stainless steel strapping.