|
 |
Street Sign Posts & Parking Lot Sign Posts
Municipal Supply & Sign Co. stocks various sizes and lengths of Rib-Bak™, U-Channel, Square Tubular
Sign Posts, and Round Tubular Sign Posts. To make the job easier, don't forget Tools & Hardware and Accessories.
And for mounting your signs, Municipal Supply & Sign Co. stocks a large assortment of high-quality brackets. For a longer life for your sign posts, add VinylGuard protective sleeves.
| U-Channel
Sign Posts & Breakaway Systems |
Municipal Supply & Sign Co. is the stocking Florida distributor for Nucor Steel Marion Inc.'s complete line of Rib-Bak™ u-channel posts and breakaway systems. We maintain a large inventory of both galvanized and green u-channel posts, as well as the Lap-Splice™ and Slip-Safe™ breakaway systems which are engineered specifically for the Rib-Bak™. All Nucor Steel products are NCHRP-350 Approved.
The Rib-Bak™ is the strongest u-channel available
on the market today. It is produced from new-billet steel with a minimum tensile
strength of 80,000 psi, and a minimum yield strength of 100,000 psi. New-billet
steel is produced from 100% recycled scrap steel. Other u-channel is produced
from re-rolled railroad rails with only 60,000 psi minimum tensile and 80,000
psi minimum yield. The Rib-Bak™ u-channel offers 25% greater strength and windload
capacity, while its higher carbon content gives you the breakaway characteristics
you need.
U-channel posts in stock
(Specify length, weight and finish when ordering.) |
| Part No. |
Length |
Weight per foot |
Finish |
 |
| CP1120700 |
7-foot |
1.12 |
Powder Coat |
| CP2000700 |
7-foot |
2 |
Powder Coat |
| GP1120700 |
7-foot |
1.12 |
Galvanized |
| CP1120800 |
8-foot |
1.12 |
Powder Coat |
| CP2000800 |
8-foot |
2 |
Powder Coat |
| CP1120900 |
9-foot |
2 |
Powder Coat |
| CP2001000 |
10-foot |
2 |
Powder Coat |
| GP2001200 |
10-foot |
2 |
Galvanized |
| CP2001100 |
11-foot |
2 |
Powder Coat |
| GP2001100 |
11-foot |
2 |
Galvanized |
| CP2001200 |
12-foot |
2 |
Powder Coat |
| GP2001200 |
12-foot |
2 |
Galvanized |
| CP3001200 |
12-foot |
3 |
Powder Coat |
| GP2001200 |
12-foot |
3 |
Galvanized |
| Other lengths are also available. |
|
|
Shop
for Green U-Channel Posts
7ft #2 Green U-Channel Sign Post
8ft #2 Green U-Channel Sign Post
10ft #2 Green U-Channel Sign Post
12ft #2 Green U-Channel Sign Post
The direct-bury Rib-Bak® U-channel post offers a strong, cost-effective solution to your sign support requirements. It is also the foundation of all breakaway systems.
|
|
Shop for Galvanized U-Channel Posts
7ft #2 Galvanized U-Channel Post
8ft #2 Galvanized U-Channel Post
10ft #2 Galvanized U-Channel Post
12ft #2 Galvanized U-Channel Post
The direct-bury Rib-Bak® U-channel post offers a strong, cost-effective solution to your sign support requirements. It is also the foundation of all breakaway systems. |
|
Shop for C Slip Safe Post Breakaway System
The durable, safe and reusable Slip-Safe¬ breakaway
base system is ideally suited for high-impact areas such as intersections
and bull-noses.
It is designed to be installed - and reinstalled - quickly and cost effectively.
It can handle sign panels up to 42 sq. ft. using three 4 lb/ft RIB-BAK posts
within a 7-foot span.
|
|
Shop
for D Slip-Safe Post Breakaway System
The durable, safe and reusable Slip-Safe¬ breakaway
base system is ideally suited for high-impact areas such as intersections
and bull-noses.
It is designed to be installed - and reinstalled - quickly and cost effectively.
It can handle sign panels up to 42 sq. ft. using three 4 lb/ft RIB-BAK posts
within a 7-foot span. |
|
Shop
for Lap-Splice Breakaway Post System
Economical breakaway system by Nucor Steel Marion Inc. FHWA & AASHTD approved.
Posts to 4 lbs. Any size SP-80 U-channel post. 2 special bolts & spacers
join base post to top post. The Lap-Splice™ sign post breakaway
system for U-Channel posts is well suited for areas that experience repeated
impact of the sign structures. Lap-Splice is a ground-level spliced system.
A
base post is
easily driven
from ground level. After the sign panel is attached to the top post, it
is then connected to the base post. Installation is quick and easy.
|
| Round Tubular Posts |
|
Shop for Round Tubular Posts:
Aluminum | Galvanized
Aluminum
posts available in 2-3/8" through 4" OD and 10-, 12-
or 14-foot lengths.
Hot dipped galvanized
steel posts, 16-gauge, 2 3/8" OD are available in 10-
and 12-foot
lengths. Special lengths are also available.
|
| Square Tubular Posts |
|
Square Tubular Posts
Square tubular posts are available in 12-gauge and 14-gauge galvanized
steel finish in 10-, 12- and 14-foot lengths. Punched full-length with
7/16" holes
on all four sides. Available in 1-1/2", 1-3/4", 2", 2-1/4", and 2-1/2" sizes.
Special sizes and lengths are also available. |
| VinylGuard Post Sleeves |
 |
VinylGuard Sign Post Sleeves
VinylGuard shrink-wrap covering is the ultimate beautification, protection and renewal solution for sign posts, poles, stakes and more. Made from the same rugged, UV-resistant material as automobile body molding and house siding, VinylGuard provides a superior alternative solution to powder coating and painting for all types and shapes of sign posts, includes square posts, u-channel posts and round posts.
• Beautify and protect new and expensive square, U-channel and round posts.
•Renew and upgrade weather beaten, rusty, scratched posts.
• Color code sign posts for identification and higher visibility.
No more powder coating, repainting,
or replacements. VinylGuard will not rust fade, splinter, crack, nick, scratch or stain. Its extreme durability provides your posts with years of protection - eliminating the need for expensive replacements or painting and is backed by our 10-year limited warranty.
Cost Effective - A superior and longer lasting alternative to powder coating, painting or galvanizing.
Heavy-Duty and Durable - 30 mils minimum thickness is up to 30X thicker than 1 - 3 mils powder coating providing years of beauty and maintenance-free protection.
Fade Resistant - UV resistant formula ensures a shiny, newly painted look for its entire service life. VinylGuard resists salt and other snow melting compounds as well as grease and oils. It can be used in salt water environments without degrading.
Quick and Easy Application - VinylGuard can be installed by your supplier or you can do it yourself in your shop or at the job site - using a heat gun.
More information
|
|
|
